Dover currently is the southernmost location on the NNES and is the entry point to the visible layout from the under layout staging.  Dover has undergone many changes since the 1960s, with the yard barely a fraction of what it was at the time.

Dover Yard B&M 1558-1568, 1564, 1566This Ted Houghton photo(1) from rrpicturearchives.net looking towards the fueling stand and deteriorating sand house is amongst those I took inspiration from for the layout. 

My choice of RDCs for passenger activity originated from this photo that provoked research into B&M passenger equipment used in the period.  BM 6202(RDC2)

The next period photo, from 1966, yielded more than I originally bargained for.  BM 1516(RS3)   My original interest in the photo stemmed from the view it provides of the turntable, for use along with photos from other angles in my efforts to reproduce the turntable.  But careful examination of the left side of the photos above the parked cars yields a surprise.  A pipe runs horizontally from a stand on the hillside back towards the roundhouse .  If you look on the hillside you can even see the shadow the pipe casts on the ground, confirming this is not some optical illusion. The pipe runs to the highest up the hillside of several concrete bases that exist at the site to this day.  When following those concrete bases along the east side of the yard, they lead directly to the site of the old well for the water tower from the steam days.  One theory is that water was piped to the boiler in the machine shop through this pipe. See here one of the remaining concrete bases and a photo of the location on the side of the roundhouse where the pipe would have connected.

Concrete base for old water pipe supports Old water pipe connection point to roundhouse

The left side of the second photo clearly shows where the pipe would have entered.  It is not clear to me, however, what the pipe configuration at this point would have been given the bracket above the pipe hole that goes through the wall.

Roundhouse today as Salmon Falls potteryThe yard itself is greatly changed today, with most of the sidings removed, the turntable gone, and Salmon Falls Pottery occupying the former roundhouse and machine shop. This photo looking across the current parking lot was taken from a position that would have previously been looking across the turntable.  Four of the bay doors have been converted to double windows. The parking lot completely hides any sign of the former turntable and tracks. The remaining bay door locations now feature overhead doors that can be used to bring in and out equipment and supplies for the pottery workshop. This similar vantage point shows the state of the building and turntable in 1979.  B&M Roundhouse While taken 14 years later than the period for the layout, the 1979 photo shows a number of details of use in my modelling such as the look of the walls of the turntable.

Looking across the old yard location away from the roundhouse

The view away from the roundhouse towards the former location of the fueling stand and old sand house leaves even less to be seen. All of the sidings associated with the former sand house, diesel stand, and earlier coaling and watering towers are gone as are all of the structures. 

 

The one remaining element evidencing the former locations of the various structures and tracks is the rusting remains of the diesel fueling stand.  Remains of old diesel fueling standAs can be seen in this photo, the stand remains partially hidden within the new overgrowth in the area.

SW-9 #1220 on DI-1 heading northbound out of Dover NH for North Conway and Intervale.The tracks through the yard start to look a little more familiar when viewed from the Oak Street bridge.  Triple tracks continue to carry freight traffic north towards Rochester and south back towards Portsmouth as well as towards Newmarket, Exeter, and other points south in Massachusetts.  This Ted Houghton photo(1) from rrpicturearchives.net on the right dated 1967 shows the triple tracks with a siding still in place to the left and cars on one of the half-buried sidings on the right. 

 

These recent photos take from the west end of the Oak Street bridge show the triple tracks and left siding remaining, but little evidence of the rest of the yard. They also show a significant change to the back of the machine shop building, with external generating plant that was not present in the 1960s.

Current view south from Oak Street bridge Zoomed in view south from Oak Street bridge View of northeast corner of old machine shop showing external power plant now in place

More mysteries and revelations arose when looking at this photo allegedly from October 8, 1967.  BM 1569(GP7)   The angle shows the deteriorating sand house, but no apparent sign of the diesel fueling stand.  Yet multiple other photos clearly show the diesel stand in place into the 1970s and as shown above the remnants still in place today.  This photo dated only 16 days later as October 24, 1967 clearly shows the diesel stand and a much lesser degree of overgrown weeds.  BM 1568(GP7) BM 1558(GP7) BM 1564(GP7) BM 1566(GP7)   This called into question the date associated with the October 8 photo, potentially rendering it older than installation of the diesel pump stand. But two additional discoveries were far more important from the October 8th photo.  All later photos I had seen showing the roundhouse showed solid doors on the stalls.  But this photo clearly documents windows in the stall doors.  Unfortunately, I discovered this after kit-bashing the roundhouse.  So it was back to the six pairs of doors to cut in openings and add windows.  The final bit of information from the photo dated October 8th 1967 is at the bottom right, where we see a switch for a turnout.  Now we know that there was a parallel track to the one in the October 8th photo with the diesel stand positioned in between the visible track and the parallel track as shown in the photo dated October 24th.  But a turnout here in this photo implies that there was yet another spur to the right of the unseen track, or no turnout would have been needed.  My theory, and my modelling choice on my track plan, was that the additional spur furthest east in the yard would have headed to where the water tower and well were located, known to be east of the fueling area based on the debris still present in the underbrush.  I have modelled that track heavily buried and either out of use or barely usable.

Many of the building details for the kitbash of the roundhouse and machine shop were based on these photos taken of the existing structure, relying on some subjective judgement of the age of the structural details to conclude what to keep and what to exclude. The llast of the four photos below initially fooled me into thinking there had been a large door on the building extension at the back.  But a closer look reveals that the photo is showing the inside of the door that is open and is on the right wall of the side of the machine shop.

East end of old roundhouse Southeast corner of old roundhouse West side of machine shop Closeup of back area next to machine shop by lower building extension

Another important element to me to reproduce the look and feel of the Dover yard is the Oak Street Bridge.  Trespassing restrictions have dissuaded me from attempting to take current photos of the bridge from track level, but the bridge structure remains largely as it was in the period, including retaining its wood deck, so close up photos on the bridge were key to my scratch build of the bridge for my layout with the exception that I had to accommodate placing it on a curve rather than over staright track.  Here are some key photos that have influenced my own construction of this bridge.

Oak Street Bridge Closeup of wooden deck of Oak Street bridge View of Oak Street bridge railing and side steelwork View of stone abutments supporting Oak Street bridge

 

(1) Note:  Photos attributed to Ted Houghton are copyright Ted Houghton and are inline-linked here by express permission.